The Apollo kit by vandy vape also known as the AP Kit, is a small, compact and durable starter kit featuring a 900mAh built in battery housed in a heavy duty TPE material with a waterproof rating of IP66, this little device will certainly take a beating The kit utilizes TPE material and features IP66 waterproof, which can provide extreme water, shock and dust protections. Powered by built-in 900mAh battery, the mod can work from 3.2 to 4.0 voltages. The MTL sub tank uses vandyvape MTL coil, with 1.5ohm and 1.8ohm resistance, which works well at 7~13W. The tank has multi-directional air holes and wide range adjustment (0.6/0.8/1.0/1.5/2.0/2.5). The whole kit will give you extreme vaping experience.
Allow us to introduce our first squonker mod, the Spruzza! The Spruzza features a small, compact design that is powered by 1x 18650 sized battery but don't let it's petite stature fool you. The Spruzza features new technology we have developed called the SSS (Smart Siphon System) which will revolutionize the squonk style platform. The SSS system utilizes a pump located on the body of the mod that siphons juice through the 510 pin and pumps juice into your squonk ready RDA. The internal juice chamber of the Spruzza hold's an impressive of juice. The Spruzza is powered by a GX-80-HUT chip which allows for wattage (power) mode, temperature control modes, TFR, TCR, and our new "Curve" mode. Curve allows the user to imitate the abilities of temperature control mode by allowing the user to set 5 different wattage over time presets for up to 10 seconds. For example if you were running a Clapton style coil, which typically require a little ramping to get to a firing sweet spot, you can set the device to fire at 80 watts for .2 seconds and then 65 watts for 5 seconds. This will quickly ramp the coils and lower the wattage after the ramp to provide a smooth hit. The Spruzza has two removable doors. One door opens to allow access to the SSS system for filling and opening the other door allows you to easily access the battery. The SSS system and the battery tray are on opposite sides of the mod so that is the SSS is overfilled and spills, it will not leak into the internals of the mod. Coupled with the Spruzza is the Fonte RDA. The Fonte is a 24mm RDA that comes squonk ready. The Fonte is constructed with high quality SS316 and features a heat sink on the top of the cap. The cap is topped with a Delrin wide bore drip tip to maximize intake. The Fonte airflow is easily adjustable by simply spinning the sleeve of the cap. The airflow inlets on the sides of the cap are arched downwards on the ends of the inlets which channel airflow to the bottom of the deck. This will create a bottom airflow effect with a side airflow cap!
Introducing the all new Aspire Breeze. The Breeze is our latest all-in-one device that employs a compact and ergonomic design, no matter how you hold or grip it, it feels good in the hand. The breeze has a built-in refillable tank that holds 2ml of e-juice and is compliant with TPD regulations. It also utilizes our U-tech coil which ensures you a flavorful vape. Not only that, its auto-fire feature adds even more convenience to your daily vaping, no need to press the fire button, just inhale from the drip tip and it will work for you. The fire button also helps further navigate the Breeze.
The Cobble Pod Kit by Aspire is a TPD compliant device. It features a sleek and ergonomic design that fits an open loop vape system into the palm of your hands. A discrete way to enjoy your favorite salt nic based e-liquids on the go with the reliability and durability of larger models. The Cobble Pod Kit is ideal for vapers of all experience levels and performs on command with a simple inhale to activate feature. Whether lounging or on the go, the Cobble Pod Kitis a perfect fit for your vape lifestyle.
The Aspire Feedlink Revvo Kit by Aspire is comprised of the Feedlink box mod and the Revvo Boost tank working in tandem to deliver you thicker clouds and purer flavor. The Feedlink mod is compact enough to ergonomically fit in any sized hand with the fire button, which is located on the top of the device for added convenience. It is powered by a single 18650 battery (Not Supplied) with a battery slot located on the bottom and a LED display to indicate the battery level. When inserting the battery into the device, the LED display will flash blue when above 3.8V, a mixture of blue and orange when between 3.5V to 3.8V, and orange when below 3.5V. The Revvo Boost tank has a 2mL e-juice capacity with an adjustable airflow ring. It has a bottom-fill design through a squonk pin connection with wattage range between 70W to 80W. Innovative Aspire Radial Coil (ARC) technology is paired along with the Revvo Boost tank to provide a smoother and cleaner experience. This Feedlink Revvo Kit may soon be the next powerhouse for Aspire.
Aspire brings you their greatest looking kit to date. Introducing the even more powerful, more up to date, Skystar Revvo kit. It’s a dual 18650, 210 watt mod with a 1.3 inch fully functioning touch screen and the revolutionary Revvo tank. Aspire has broken the mold for a tank of this type and brings you an all new concept in coils, the ARC. A coil for great vapor production and out of this world flavor. The Revvo tank itself comes in a TPD compliant 2ml version. It has adjustable top airflow and is top fill, it is very easy to fill, change coils and even replace the glass. The Aspire SkyStar Mod features a 1.3inch beautiful touch screen impressive display. Swipe down twice to access the full menu system and the responsive touch technology will have you navigating the system with ease. The Aspire SkyStar features Wattage, Voltage, Bypass, Temperature and CPS. The screen also displays the time with the digital clock. Swipe up twice to instantly access your power controls. The SkyStar is 33mm thick to provide enough room for most tanks without overhang. Battery installation is so easy. Positive and negative terminals are clearly marked and the battery compartment is literally accessed by a simple use of the finger nail on the lower rear slot. We would always recommend using an eternal charger such as XTAR to charge your batteries, however, the SkyStar Mod supports on board charging via micro USB as well as future Firmware updates. When charging the display will show a very accurate charge meter for both installed cells and will also indicate charge time.
The tube is designed to be powered by either a 18650 cell or the newer 20700 cell! A smart contact system (that is easily swapped to change battery size on the fly) prevents arcing on the battery contacts. This beauty of a tube is 26mm wide, as the amazing Unholy V2! The Unholy V2 is a beast of an RDA, that is simple yet INCREDIBLY efficient! Two MASSIVE posts (with extremely sturdy 4mm grub screws) will hold your coils in place, and a ball-bearing system within the posts will make sure everything stays locked in place. Featuring an incased ball bearing within the post itself, it allows for new installation possibilities! Using a lead on top and one at the bottom of the ball bearing, you can install any coils as you would do in a velocity-styled deck - or you can install both leads under the ball bearing for a firm grip on your coils. Here's what's included with the BAREBONES kit : The BAREBONES tube. The Unholy RDA V2 18650 contact pin + delrin sleeve Contact tool for easy switch between 18650 and 20700 cells Misc parts.
The BIGFOOT 200W Kit is the new sleek and stylish flagship device from Wake Mod Co. The clean, crisp and modern interface features a 1.3 inch TFT color screen alongside a beautiful precision deep-engraved gold WAKE emblem. With high-gloss 24k gold mirrors accenting throughout the device and tank, the BIGFOOT has the capability of outputting a maximum of 200W with a resistance range from 0.05 - 3.0 ohm. Smaller than most 200W box mods, the BIGFOOT is compact in size and provides a perfect quality weight without being bulky or heavy. The mod features unique interchangeable designer back plates and an ultra-convenient side-bar fire mechanism that includes a beautiful deep engraved WAKE name. The BIGFOOT 200W Mod is powered by two 18650 batteries (sold separately) and the device boasts a full intricate temperature control suite and immense protection features for the safest, most versatile vaping experience imaginable. The device is paired with the BIGFOOT Sub-Ohm Tank, a 24mm flavour machine constructed of gold-plated stainless steel and matte hard-anodized aluminum color finishes. The convenient top-fill system has a single large kidney-shaped opening for easily refilling the tank and comes equipped with an ultra thick bubble glass. Utilizing the Sigelei Mesh Coil Family, the kit includes one 0.2 ohm MS-M Mesh Coil (40-80W) and one 0.2 ohm MS-H Coil (80-120W). The gorgeous BIGFOOT Sub-Ohm Tank provides epic flavour without any leaking issues and is fully compatible with Baby Beast Replacement Coils. The BIGFOOT 200W TC Starter Kit enters the market with a beautiful chassis and an unparalleled experience. Note: In order to utilise the compatible SMOK TFV8 Baby Coils, please make sure to change the 510 pin included within the package. Free Littlefoot RDA with each Bigfoot Kit purchase. (Assorted colours and while stocks last).
What's in the box:1 x Bonza Kit 1 x Accessory bag 1 x User Manual 1 x 18650 Battery Adaptor 1 x 510 Adapter
Vandy Vape bonza Kit extension tube is designed to turn a standard Bonza kit into a stackable mod with ease. Whats in the box:
- • 1x Selected Colour/Material Bonza extension tube
The ever popular AIO (All In One) device from Aspire, the Breeze, has been redesigned with an improved filling method. Introducing the Breeze 2 now with new features and a new pod style system. The same compact and ergonomic design but a more convenient pod system that holds 2ml of e-juice, or a slightly larger 3ml version. It still has an ergonomic design and still comfortable to hold. We also retained the great U-tech coil technology ensuring you a flavorful vape. The new Breeze 2 comes in four great satin finishes, black, red, grey, blue to suit all tastes. Coil installation is easy too, just pull and remove the drip tip, unscrew and pull out the chimney unit. Then detach the atomizer from the airflow control ring and replace it with a new one. Screw the chiney unit back to the pod system and replace the drip tip section. The aspire Breeze 2 although has replacable U-tech coils is also considered as a Pod system, making filling up a doddle, squeeze the pod release buttons on each side of the device to release and remove the pod. Invert the pod and lift the silicon seal, place the filling bottle/dropper into the pod filling hole squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system. Replace the silicone seal firmly and re-insert the pod into the power unit.
Titanium setups by Comp Lyfe. Each mod has it's unique, custom anodising and are one off's. See specs below for each setup. Each setup comes with a certificate of authenticity and a mod bag.
Custom Setup FeaturesCLS1 - Titanium Anodised HK knurled mod, 24mm 2 post silver post battle deck, Battle cap S 24, Brass button housing with CL engraving. CLS2 - Titanium Anodised HK Classic mod, 24mm 2 post silver post battle deck, Battle cap S 24, Brass button housing with CL engraving. CLS3 - Titanium Anodised HK knurled mod, 24mm 2 post silver post battle deck, Battle cap S 24, Brass button housing with CL engraving. CLS4 - Titanium Anodised HK knurled mod, 22mm 2 post silver post battle deck, Battle cap, Brass, button housing with CL engraving. CLS5 - Titanium Anodised HK Classic mod, 22mm 2 post silver post battle deck, Battle cap, Brass button housing with CL engraving. CLS6 - Titanium Anodised HK Knurled mod, 22mm 2 post silver post battle deck, Battle cap, Brass button housing with CL engraving. CLS7 - Titanium Anodised HK knurled mod, 24mm 2 post silver post battle deck, Battle cap S 24, Brass button housing with CL engraving. CLS8 - Titanium Anodised Predator mod, 22mm 2 post silver post battle deck, Battle cap, Brass button housing with CL engraving. CLS9 - Titanium Anodised Predator mod, 24mm 2 post silver post battle deck, Battle cap 24 S rose gold, Brass button housing with CL engraving. CLS10 - Titanium Anodised Battlefield mod, 22mm 2 post silver post battle deck, Captains cap, Brass button housing with CL engraving. CLS11 - Titanium Anodised HK knurled mod, 24mm 2 post silver post battle deck, Battle cap S 24, Brass button housing with CL engraving. CLS12 - Titanium Anodised Predator mod, 22mm 2 post silver post battle deck, Modfather cap, Brass button housing with CL engraving. CLS13 - Titanium Anodised HK Knurled mod, 22mm 2 post silver post battle deck, Battle cap, Brass button housing with CL engraving. CLS14 - Titanium Anodised HK Knurled mod, 22mm 2 post silver post battle deck, Battle cap, Brass button housing with CL engraving.
Custom Setups Contents:
- 1 x Full Comp Lyfe setup
- 1 x Certificate of authenticity
- 1 x Comp Lyfe mod bag
Featuring a ONE PIECE solid tube with the classic and critically acclaimed Crossbones V2 switch, this beast of a mod is fueled by 2x 20650 cells, or 2x 18650 cells with a specially designed adapter. The stacked Crossbones V2 delivers incredible power, and amazing switch mechanism for an unique The Unholy V2 is a beast of an RDA, that is simple yet INCREDIBLY efficient! Two MASSIVE posts (with extremely sturdy 4mm grub screws) will hold your coils in place, and a ball-bearing system within the posts will make sure everything stays locked in place. Featuring an incased ball bearing within the post itself, it allows for new installation possibilities! Using a lead on top and one at the bottom of the ball bearing, you can install any coils as you would do in a velocity-styled deck - or you can install both leads under the ball bearing for a firm grip on your coils. Here's what's included with the EVIL TWIN kit :
- • The CROSSBONES V2 STACKED tube.
- • The Unholy RDA V2.
- • Special design sleeve for 18650 compatibility.
- • Hybrid top contact disc.
- • Misc parts.
- • Dimensions: 90.7mm X 24mm X 42mm
- • 510 Squonk Connection
- • 2ml Squonk Bottle
- • Working Voltage: 3.2V - 4.2V
- • Output Voltage: 3.3V - 4.5V
- • Resistance Range: 0.8Ω - 3Ω
- • Max Output Power: 20W
- • Battery: Built-In 850 mAh Battery
- • Single Coil Build Deck
- • Adjustable Airflow
- • 1 x Vandy Vape - Simple EX Squonk Kit
- • 1 x QC USB Cable
- • 1 x Stainless Steel Top Cap
- • 1 x PC Drip Tip
- • 1 x Delrin Drip Tip
- • 1 x Instructional Manual
- • 1 x Bag of Spare Parts
- • 2 x Superfine MTL Fused Clapton Coil
The ExoArmor By HD&E is upon us and what a beauty it is, this device will allow you to use any AV tube set in a series configuarion, dont have any AV tubes dont worry, this is a full kit and doesnt require any additional purchases (apart from the usual High drain batteries and an atomizer) Stand out from the crowd with this Cloud sport device and customize to your hearts content, got a time keeper and a able no problem run them side by side for the uniqueness we all as vapers strive. Please Note: This device is not for beginners, it uses two 18650 batteries set in series, a very good understanding of ohms law, battery safety and hybrid mechanical mods is needed.
The ExoArmor By HD&E is upon us and what a beauty it is, this device will allow you to use any AV tube set in a series configuration, doesn't have any AV tubes do not worry, this is a full kit and doesn't require any additional purchases (apart from the usual High drain batteries and an atomiser) Stand out from the crowd with this Cloud sport device and customise to your hearts content, got a time keeper and a able no problem run them side by side for the uniqueness we all as vapers strive. Please Note: This device is not for beginners, it uses two 18650 batteries set in series, a very good understanding of ohms law, battery safety and hybrid mechanical mods is needed.
The Flux Box Mod has a max output wattage of 200W. To cater to different firing preferences, the mod is designed to feature 3 firing modes in a step-up way: the Standard Mode that fires faster than an average mod, the higher Powerful Mode for those who want to experience the next level of faster firing, and the extreme Powerful+ Mode for those who prefer the speediest firing ever. To provide some extra fun, the mod comes with a fancy light-show function. Centered on the front of the mod, the light shines slimly and vertically half the height. 7 colors are available to choose, individually or mixed. Wanna keep a low profile? Simply turn it off!
The hugely popular GeekVape Aegis Legend is now available in a scaled down option. The Aegis Mini is a stunning box mod with a inbuilt 2200mAh battery and capable of pushing up to 80w of power. The compact device has a ergonomic and robust design and a easy to use control layout. Using the advanced AS-80 chipset and accompanied by the fantastic GeekVape Cerberus tank which is optimized by the Super Mesh coil that maximizes heating contact surface area in order to provide maximum flavor and large vapor production. With extreme water, shock and dust protections, this kit is the perfect option for a vaper looking for a compact device, or for a new starter wanting to get in to sub ohm direct to lung vaping.
IJOY Diamond PD270 234W TC Kit IJOY Diamond PD270 234W TC Kit, inspired by multi-faceted diamond cutting technology. Comes with super large OLED screen blends in to the panel, giving the device a unique and classy look. Powered by dual high rate 20700 batteries and maximum output can be reached
IJOY SABER 100 MOD is a single 20700 battery regulated tube mod! The structure is compact, all CNC engraving, rich colors.
The IWEPAL chip is carried inside, which adds short-circuit protection, low-power protection, and anti-reverse protection of the battery.
This makes the mod safer and more reliable and removes the unsafe factors of the mechanical mod.
Personalized pentagonal fire button and adjustment buttons, with OLED display, 100W power adjustable, strong output, easy to operate.
Support large-diameter tanks. The battery is removable and supports USB fast charging.
Equipped with a 20700 battery, the energy density is almost 1.5 times higher than 18650, and 18650 battery can also be used through the battery adaptor!
The Luxotic BF Box is a box mod designed by JayBo. This Limited Edition version has been modified by JayBo Designs and comes in pearl white with a 14K US Gold plated side door, bottom plate, Tobhino RDA top cap and beauty ring. Powered by single replaceable 18650 cell, the Luxotic BF Box is convenient in use and fashionable in looks. The Tobhino RDA is a high-end bottom-fed rebuildable drip atomiser that impresses us with its unique airflow design and detachable structure. Simple, compact yet powerful, that’s the Luxotic BF Box with Tobhino BF RDA.IMPORTANT NOTE: This is a mechanical mod and should only be used by experienced vapers
A pack of two replacement 1.6 ohm pods for the Onevape Lambo. With a 2ml capacity, simple push fit connection and a bottom fill system, these pods will give a smooth draw and great flavor from your favourite liquid.
The Onevape Lambo is a stunning draw activated pod device modeled on the famous car design. With sleek lines and a striking look this pod device stands out on the market. Using a draw activated system and a easy to fill 2ml pod, getting this mod operational is extremely easy. A circulating air intake ensures a flavor packed smooth vape around the 1.6ohm coil and the 370mAh battery will keep you charged up for a day depending on use. If you do need to charge, the built in USB charge port will have you back up and running in no time.